Problems You May Come Across During HVLP Spray Gun Painting

Considering different flow of the spray guns: there are two normal type of guns, one is for the flow of material, the other is the flow of fluid. And while the gun is under working, the fluid needle take the control of the required paint for the painting work. If you wanna have an easy control of these material, you could use the trigger to control the fluid needle. During th atomization of the painting work, low-pressure is applied to give perfect finish by the HVLP spray gun. And HVLP gun belongs to the air powered gun and uses the ambient air pressure to spray the paint to the target.
Have a look at the HVLP spray gun, and you'll find there are holes on both sides of air caps. Have you ever think about the uses of these holes? They are actually called air horns. This is what we used to makes a pattern during the painting work. When the air meets the material it is in the impingement zone. As the air comes out of the horn the air hits directly in front of the air cap. So you can see these HVLP spray gun are quite popular during the whole processes.
And after painting the items with your HVLP spray gun you should paint them in an enclosed gun washer. Right now it's already a regulation to do so. And what if you have never used it before? Feel a little bit confused? Come and follow the essential instructions. Make sure you get to know that those guns are designed to work in cycles of 60 seconds, so don't leave you gun in there beyond that time period. The cleaning action is like putting your gun fully immersed into lacquer thinner. Leave your gun in it too long or too often would do damage to your gun definitely.

If you spray the work with a bad pattern, you should not complain about the HVLP spray gun, actually you should have a good balance on the material. What's more if you wanna have a perfect finish, you should use more guns for the refinish materials. Anyone who wanna have a good start with HVLP spray gun could come to www.chinapaintsprayer.com for more information. 
http://www.chinapaintsprayer.com/news/during-hvlp-spray-gun-painting.htm